Description
- High-concerned chemical: None
- Installation Method: Assembly
- With Cabinet: No
- With Rollers: No
- Frame Material: Metal
- Specific Use: Office Desks
- Appearance: Modern Style
- General Use: Commercial Furniture
- Origin: Mainland China
- Material: Metal
- Type: Office Furniture
- Style: Laptop Desk
- Load Capacity: 1000N
- Max.Speed: 15MM/S
- Input: 220-230VAC
- Load: 100KGS
Package include:
Note 1: We have two colors, white and black, pls choose the one you like when you place the order.
Note 2: we have two types, two sections and three sections, pls choose the one you need when you place the order.
Technical Specifications
Input: 220-230VAC
Output Power: 24VDC
Load Capacity:1000N
Max.Speed: 15MM/S
Stroke:480MM
Min.Install Dimension:700MM
Load:100KGS
Operation Temperature: 0-40℃
Duty Cycle:Max.10% or 2 min.on and 18 min.off
Size: high/low limit of this frame is 23.4"-49" (height),41.1"-53.7" (Width)
this frame is two section adjustable
This frame include dual motor
the maximum Load is 800N
Direction for Use
1. Correctly connect the Control Box,Handset,Power Wire,Lifting Column, Patch Cord.(Picture 1).
2. Plug the power cord into 110~230VAC outlet:The Digital Tube will
display “PON” for seconds it means electrified successfully,need to
reset. After reset the Digital Tube will display 23(MM),reset finished.
RESET:
Press and hold the down button, after 5 seconds the desk will begin
tolower, until to the lowest height then slightly rise.Reset finished.
Release the down button.
3. After reset,press and hold “UP” button,lifting column will rise,release to Stop.
4. After reset,press and hold “DOWN” button,lifting column will fall,release to Stop.
5. How to memory:
After pressing and holding UP/DOWN button to a height,press button S
first,then press button 1,this height will be remembered by button
1.Still pressing and holding UP/DOWN button to another height,press
button S,then press button 2,this height will be remembered by button 2.
The same way,the button 3,4 can remember other heights.
After memory,press 1/2/3/4 button,desk will motion to the height it
remembers,press “UP” and “DOWN” button.The motion will bestopped.
Notice
1.This product must be used under the correct technical parameters.
2.Keep away from liquids,corrosive gases,dusty environment.
3.Contact our factory when necessary.
Application scenario:
Reviews
There are no reviews yet.